T10000-20H-33

The ALI CERTIFIED TCE 10,000-lb. Dualmetric Overhead Commercial Lift is the newest and best solution that provides ample door opening clearance for entry to vehicles. Each lift is designed using a single piece column, a variable overhead cross-member, and extra tall carriages that all combine to create a very strong and reliable lift design. A single point lock release system uses minimal effort to disengage the carriage locks. The front arms articulate a full 180 degrees allowing the lift the greatest range of pick up points and allows both the front and rear three-piece arm configurations to be ideal for lifting cars, trucks, and other light duty passenger vehicles. Features a direct drive cylinder design which allows users 78-inches of rise height with the included truck adapter kit. This lift is constructed to be trouble free for years in a commercial shop environment. Meets and complies with 2017 ANSI-ALI testing standards, as well as ANSI/U.L. 201, CAN/CSA C22.2 NO. 68 and CE Ref. no. EN1493-2010 requirements for garage equipment.

Features and Benefits

• Meets and complies with 2017 ANSI-ALI testing standards
• 10,000-lb. Lift capacity
• Dual Symmetric and Asymmetric compact three-stage front and rear arm designs
• Front arms articulate a full 180 degrees
• Triple telescoping arm design
• Low profile arms
• Automatic arm restraints
• Single point lock release
• Automatic engaging carriage locks
• Oversized 57” tall lifting carriages
• Dual direct drive hydraulic cylinders
• Chrome plated cylinder rods and pistons
• Steel aircraft quality equalizing cables
• Matted powder coat finish
• ETL rated power unit
• Water/oil resistant power switch
• Overall height 143.7-in.
• Rise height 69-in.
• Max rise height with adapters 78-in.
• Three optional variable drive-through clearances 88.15-in, 94.06-in, 99.96-in
• Truck adapter kit (3) lift pad extender heights 1.5-in, 3-in, 6-in
• Manufacturer warranty 2 years limited